It's supposed to pass 60F next week. I won't know how to dress. Time for some fast sailing.
It doesn't like like double digit speed, but it is.
I don't have many pictures in the high teens--I guess I'm busy!
It's supposed to pass 60F next week. I won't know how to dress. Time for some fast sailing.
It doesn't like like double digit speed, but it is.
I don't have many pictures in the high teens--I guess I'm busy!
rev. 7-25-2024
Don Jordan, the father of the series drogues, suggested a chainplate of conservative dimensions, but did not detail the design. He wanted to keep it simple so that people would use them. Most commonly, these plates are installed horizontally, because that looks right. But what if the pull is not horizontal?
The angle are exaggerated to make a point. Tank or model testing would could refine this. But I'm pretty sure that not all of the strike sure horizontal and thus the first few bolts are carrying most of the load.
In my limited experience, and based on what I think is common sense, the strongest pulls are from a downwards angle. From basic engineering statics, the largest bending forces are near the transom end, and the largest shear loads on the bolts will be when the load is off-axis. That suggests either more or larger bolts near the transom, but more will better distribute the shear stress load to the laminate.
Hardly a detailed analysis, just thinking. In practice, it would be simpler just to build it oversize, though internal reinforcement of the laminate might be avoided by this sort of design.
There we were, sailing across the Chesapeake in moderate winds when, something small and hard clattered into the cockpit from the masthead. For a moment were were terrified that i must be some critical pin, and that any moment the mast would go over the side. But upon closer inspection, it was a jawbone.
I snicker when I see people with a a foul weather jacket and jeans. I snicker quietly when I see foul weather gear on a cold, dry day. Really, it's more like going skiing and a walk in the rain.
Whats wrong with this?
Doesn't look "sailory?" It's warm, highly water repellent, breathable, warm, and MUCH easier to move in than standard foul weather gear with underlayers.
I went paddling later. For that, I wore a drysuit. That's really a safety thing. I've never tipped a kayak, other than whitewater, but 32F water will kill. And suck majorly. And the dry suit is very comfortable paddling, like sitting at home on a warm couch. (You can search this blog for drysuit stuff.)
I've got a lot of winter combinations, but they only include rain gear if it's, well, raining.
I'm not normally into sunset photos, but this one by a fellow F-boater (Farrier forum) caught my eye. The reflections look like fog floating on water. Very cool. Makes me miss summer. I avoid being on the water at sunset in the winter, because it is time to head home.
It's not the cold that prevents me from cruising in the winter, it's the short days. I'd rather go home. And in truth, you get a lot of solitude during the day, on the water, so few people sail in the winter. Just me and the scotters.
rev. 7-25-2024
I posted this December 2020, after the last election but before it was certified. Little did I know where things were headed. Once again, I think the words of Abraham Lincoln have relevance.
Democracy. Fair election processes. "Our freedom is under siege." I don't think these words mean the same thing to all people, so how can we have a conversation?
Abraham Lincoln was confronted by this problem on a colossal scale. The rank and file on both sides believed to their very marrow that they were right and that their cause was just, even using the same words. Liberty and Freedom.
The Blue Book is where you find used car values, right? Well, not in 1906, when there weren't enough used cars to create a market or the demand for the Blue as we know it today.
30-40F
So what am I testing for this season?
Featured in Good Old Boat Magazine, it is nothing more than an old stainless pot inverted over the burner, a flexible 1-inch flue, and a place to place a cooking pot on top of it. Great for warming the cabin and heating up left-overs, all while venting the combustion gasses and CO2 out of the cabin. Very efficient too; the flue is barely warm where it exits the cabin.
In fact a good many have been one by a single electoral college vote.
The voter turnout is the striking thing. Over the past few decades, 60-65% of registered voters was typical, with very little fluctuation. This time the total looks to be closer to 80%. Of course, only about 2/3 of qualified voters registered, lowering that figure to about 50% participation. I guess 1/2 the people figure one vote does not matter and it's not worth their time.
From a point of view, I guess it's surprising that even 1/2 the people can do anything together.
I missed this one. We all heard when Trump ruled that e15 could be sold. What we missed, probably because it was only publicized in Iowa (tight election!), is that e15 can be put in an e10 pump without labeling it as such, subject only to state approval.
reuters--e15 allowed in e10 pumps
I'm not sure it's much of a news item. It may very well be reversed, and probably will never move far out of the heartland.
But the thing to remember is that marine engines, including outboards, do NOT have computers and CANNOT adjust to the leaner conditions this creates.
boating industry mag. e15 in e10 pumps
Be careful what gas you buy. E10 is sort of OK. e15 is probably OK in your car. But not in your outboard.
----
Interestingly, this was announced mostly in Iowa 52 days before the election. Kinna obvious. If I lived in Iowa I'd ask "Why not three years ago? And will you change it back in a few months to court big oil... again?"
----
Actually, it seems there is no such executive order. He just tweated that there would be. So he lied to Iowa?
If I'm wrong, post the link. I'd really like to see the text.