Monday, March 14, 2016

Extension Ladders On-Deck



Extension Ladders—the Rope Climbing Alternative
Say I don’t like the idea of dangling from a finger-thin line the length of which I have not inspected. Of course, I could swap it out, but that still leaves the condition of the pulley in question; I know a guy who decked-out after the pulley axel failed, dropping the rope onto the sharp edge mast cutout, cutting the rope. Obviously I can use multiple back-up lines, but say I just don’t like the idea. I would rather use a ladder because it gives better leverage and is less tiring. (The writer is actually an avid rock and ice climber, with 30 years of active climbing all over the US. He trusts ropes just fine, but prefers the stability and ease of a ladder when practical.)

Is it safe? We seldom observe ladders up masts—unless we are talking about mast steps, which I don’t have and don’t want. Or perhaps the project is installing steps up to the spreaders, and I just can’t see myself working for that long hanging from a string nor making so many trips up and down for bits and pieces. Well, the answer regarding ladder safety is a qualified “yes,” as long as the boat is located in a well protected marina and the ladder well secured. Weekdays are best (fewer wakes).  We’ve used ladders many times, and they remain a favorite, in spite of having racks of climbing gear and no fear of ropes and high places. Sometimes a ladder is simply better. But I take precautions; a safe ladder makes for more efficient work.
·         Not on the hard. While some boats may be blocked well enough for this—multihulls come to mind—it doesn’t matter because yard rules prohibit climbing the mast of a blocked boat. Too much weight up high and too much liability for them. The idea of ladders on the elevated deck of a blocked boat justifiably gives them the willies.


To the spreaders. I don’t like going too much past the spreaders for a number of reasons. On smaller boats—less than 30 feet—the ladder adds weight to an already top-heavy situation. The deck space for the foot is limited resulting in a ladder set at too steep an angle. For larger boats, the required ladder is simply impractical. Extension ladders become progressively more ungainly the longer they become, and a 40-foot extension ladder is a monster for one person to handle, or even for 2 on the deck of a modest boat. A ladder reaching only to the spreaders, on the other hand, can be quite reasonable.

Another reason we like ladders to the spreaders is that it seems most of my work is there, on the forward side of the mast. A ladder gives best access to the steaming light, deck light, lazyjack anchors, flag halyards, spreader boots, and RADAR. On a previous fractionally rigged boat, we could reach halyard exits and shrouds. When climbing with ropes the mast is ascended from behind because the main halyard is used. On the forward side only the spinnaker halyard—if there is one—is available, and often it is suspended from an external block on a crane; the spinnaker halyard is not recommended for this reason. A genoa halyard is available, but you have to lower and clear away the sail. We still use ascenders when we need to go clear to the top, but that is nearly always just an inspection trip, without the repeated up-and-down laps for tools and parts.



  • Tie the boat more tightly. While docklines require some slack to deal with tides, the motion at the spreaders will be less if you minimize the slack. Very tight lines can actually increase motion, so leave about 1-foot of slack. Remember to re-set the lines when you are finished, and adjust them as needed if the tide is swinging
  • Light weight ladder. While ladders used in industry are heavy duty and are rated at 300-375 pounds, it will be far more pleasant to use either light commercial (225 pounds) or household (200 pounds) ladder on the deck of a boat. They are much easier to work with, and because of the way it is to be secured (to the mast and deck), it will be stable and reliable. Of course, if you’re a big guy you will need a ladder with the proper rating and should be able to handle the weight. 
  • Secure the top rung. Pad the top rung of the ladder by wrapping with a towel secured by sail ties. Additionally, secure the top rung to the mast with a sling around the mast and back to the ladder. This should be an easy fit, free to slide, but not so loose that the ladder rails can slide completely off the mast to one side. This will guide the ladder as it is extended, siding up, and can be tightened once climbed, if desired. This sling should be strong, at least 3/8-inch or 4000-pound breaking strength, like any climbing anchor. Second, attach a spare halyard or topping lift to the top rung. This can be used to
    help raise the ladder and provides some additional security.
  • If the halyard is used to lift the ladder it can be advantageous to lash the sections together. Otherwise they may pull apart.
  • Raise the ladder to within the range of angles marked on the ladder. Too vertical is neither safe nor fun. It will also result in slower work.
  • Secure the base. Secure the base of the ladder against fore-aft and side to side motion using the genoa sheets (I used spinnaker sheets in the photos) to prevent side-to-side motion. Do not over-tighten with winches; ladders can be pulled apart. Secure the bottom rung to the mast to prevent kick-back. There should be NO possibility of motion. Pad the deck if you must, but the rubber feet will be more secure and should not unduly load the deck, no more than jumping down on a heel. Place them carefully and they should not mark. If there are spikes on one side, tape them up. Thus secured, the ladder should be as safe against falling as any fixed ladder, and at a better angle than many. However, boats move, and that requires additional precautions.
  • Climbing harness. If wakes can cause the boat to roll, a climbing harness can be a good idea, either
    belayed by a crew member or attached to a tight safety line paralleling the ladder by a rope grab. Unlike climbing by rope, however, there will be no discomfort from harness pressure.  Harness is generally not needed on catamarans, though this depends on the person and the work to be done. If two hands are needed, use a harness, if only to tie-off once at your working stance. The tie-off should be nylon—the impact force of even a short drop will shake your teeth loose and can create dangerous loads. In principle, the tie-off is for side-to-side motion only, not falls.
  • Climbing and work posture. While climbing keep both hands free. Don’t carry anything, but rather trail a line to a tool bag, as though you were ascending by rope. Tighten the rope securing the top rung to the mast as soon as you get there. Have a way to secure all of your parts and tools while working, whether by lanyard or deep-sided bag. While working, be certain to keep your knees locked into the sides of the ladder. Use a firm and slow hand with all tools and parts; a light touch is prone to dropping things.

Like many things, safety comes down to being methodical. Secure the ladder in all directions; it should not be able to move, even if you tug hard. Climb carefully, prepared for motion at all times. People do fall from ladders, but seldom those that are properly secured. Be safe.


Sunday, March 13, 2016

Beard Eradication

Sometime around Christmas I got lazy about shaving, I decided that I might as well see where that led, and finally I was determined to ignor the interminable annoyance and surprise my daughter with it when she came home on spring break. In that last goal, at least I was a success.

My wife determined it had to be removed in stages and that those sages be recorded, for the amusement of all.





And once the mustache came off, I felt clean for the first time in months.


Saturday, March 5, 2016

Emergency Steering

rev. 7-24-2024

So what, it snowed yesterday. Testing does not wait.

This grew into a number of articles for Practical Sailor and Good Old Boat. Later articles focused on emergency steering drogues you assemble in minutes from gear on hand: An anchor, some chain, and a fender. Hang the anchor from the fender, with some chain in front of it, and then use as a steering drogue as below.  It works and people have sailed 1500 miles with that rig and no rudder. 

 That said, I repeated the test with a commercial drogue (Delta Drogue) the same day, and the Delta Drogue was much easier to handle and very compact to store. If I were crossing an ocean I would pack a commercial drogue. More importantly, I would take a test day, as below, and try it out in a breeze. There are lots of ways to rig it wrong and screw up. Best to learn near home.

This past fall I jammed a rudder on a submerged tree. Two loud thumps, the helm did not answer at all, and the boat was turning left. To reach my destination I adjusted sails (genoa in, traveler down) and even lowered one engine (just for drag--not running) and played the traveler as though it was the helm. Maneuvering into the harbor under power was made reasonable by having 2 engines. Once anchored, I disconnected the jammed rudder and enjoyed the rest of the cruise on one rudder with slightly mushy steering. The autopilot even worked , so long as I kept the sail balance fair.


Towing SeaBrake 24GP under power at 4.5 knots. Should be 7.4 knots at this throttle.

What if I had only one rudder, like most half-boats? A rather expensive tow would have ensued, perhaps anchoring for a time when I reached shallow water. The cruise would have been ruined for certain. I always thought emergency steering and drogues where for ocean crossing and storms, but now I realized that even on the Chesapeake, a bent rudder can lead to trouble in short order. And so my closet interesting in drogues (I actual have 2, leftovers from my Stiletto off-shore days) has exploded into full-on testing for Practical Sailor. So far I have 4 brands lined up and one factory team that wants to help me play. What fun. The intention will be to try them all on all courses and hopefully in several wind speeds, seeing what works and creating drogue speed polars. There will also be some high-load testing related to storm use, but that is separate article.

Though I have had these for years, I never tried them for steering. A few tips:
  • For storm use, of course, they go farther back, 150 feet-250 feet.
  • But for steering, bring it in close, as little as 20 feet off the stern. Much more responsive.
  • Spinnaker sheets work well for a bridle. You can actually steer by sitting next to a winch and playing just one leg.
  • Attach the sheets at the widest point, particularly on monos. Near the stern is fine for cats, but a little forward is better (more responsive).
Observations:
  • 100-110 true with the rudders jammed 65% to leeward. I was surprised. The wake was reasonably straight and leeway less than I feared.
  • 70 true with rudders straight.
  • Very slow in light winds. You are going to loose about 1-3 knots. The Seabrake is too large for this boat. We'll have to see how the Small Shark works. I also need o try the Seabrake in close, partly out of the water, to reduce drag. I forgot.
  • Pretty stable. I can imagine using it for days, with crew. Not as good as autopilot, but not bad.
  • There is a tendency to round up if sailing to weather in variable winds; when the genoa looses pressure, the drogue is still pulling, and the boat comes up. But if you catch it before it stalls, by releasing the windward bridle line a few feet, it recovers well.
 Rudder 65% port requires the drogue full to windward to maintain anything close to a beam reach. Without the drogue we would be going in tight circles at best, stuck.


  • With the rudders straight we could make some ground to windward... but slow. Only about 70 degrees true course over ground, and slow. Notice that the drogue is nearly centered. The drogue is clipped to the sheets with only 8' of 3/8" BBB chain as an extension.
     
    Slower than sailing, but much faster than sailing in circles, faster than waiting for help, and more comfortable than drifting beam-to-waves. Good for parking the boat transom-to-waves while making any sort of repairs (they will be easier if the boat is not rolling).

Thursday, January 21, 2016

Cheap Gloves

As winter arrives, ski gloves and snow blower fly off the shelves. But if you are doing mechanical work in the cold what you need are thin gloves with some grip that don't slow you down. I've found that these 10-for-$3 cheapies from the thrift store fit best. My fingers reach the tips, I can pick up a dime, and for the price I only need to wear them a few times. Construction companies commonly give laborers a new pair each day.


Tuesday, January 19, 2016

Digging Through Solar Mis-Information on the Internet?

You can pay $500-700 for a name brand panel. No doubt they are very good and 4 different middle men took a cut to get it there. You can go on the internet and get something on E-Bay that might... or might not work. When I installed my system I went on the net, took a good close look at the images and specs, read a few user blog post, and picked out panels that were solid and are still working well. But I've heard stories of the other sort.

Hotwire is a guy that started investigating solar and wind for hi own use 20 years ago, tried everything, tested samples, and has made a solid little name for himself among cruisers as a guy that sells right-priced stuff that he has tested and vetted himself.

But it's a lot more than that. Wind, charge controllers, mounts, lighting, refrigeration... all with an eye towards economy and reliability.

Check it out.

Monday, January 18, 2016

Shoes

We hear that the wife has too many shoes, but what example do we guys really set?

On the boat there are:
  • running shoes
  • deck shoes
  • flip-flops
  • sandals
  • dingy sailing shoes
  • Five Finger shoes for kayaking
  • wet suit boots
  • Dive fins (2 pair--do these count?)
At home in the "toy" area there are:
  • approach shoes (5.10s)
  • light hiking boots
  • hiking boots
  • alpine boots
  • mountaineering boots for ice
  • mountaineering boots for big mountains
  • rock shoes ( pair)
  • alpine ski boots
  • cross-country ski boots
  • bike shoes (2 pair)
  • mountain bike shoes
  • ice skates
  • in-line skates
  • in-line hockey skates
  • steel-toe work boots 
  • steel-toe rubber boots
  • painting sneakers (retired running shoes)
  • More dive fins
and oh yeah...
  • several pairs of dress shoes--I forget, since I don't wear them often.
None of this seems odd to me. I guess it comes down to point of view.

Thursday, January 14, 2016

A Rant About Jacklines and Tethers

rev. 7-24-2024

Windward vs. Centerline

The old conventional wisdom was windward and leeward lines, in as far as the cabin and shrouds would allow. Now the new mantra is centerline, and that anything else is unsafe and the user uninformed. They blithely ignore facts suggest something different:

  • You can't slide uphill.
  • Every case of injury by dragging along side was to leeward. They were caught in the bow wave.
  • It is farther to leeward if the jackline is to windward.
  • Waves and gusts come from windward.
The new internet forum wisdom feels more like group think than change based in evidence and experience. By all means move the jacklines in as far as practical, but I believe the physics of falling limit windward overboard incidents. If you know of a documented case, please comment.

[note: The Cal June Jim Buoy model 9225 harness that I am wearing does not pass ISAF or ISO standards and I am not recommending it.It is lightweight, comfortable, and I believe that it is adequate with the shock absorbing tethers that I use. The failures occurred at forces 3 to 4 times greater than my engineering design allows.]
 
7-24-2024. I have long since replaced this with a better harness, but still home-made (I have experience fabricating rock climbing gear--don't try this at home.  The reasons I fabricated my own are:
  • Wider chest band. Testing suggested that anything less than 3 inches is asking for a rib injury.
  • Fleece lining.Much more comfortable if wearing a thin shirt or no shirt.
  • Easier on-off. The new harness closes with a non-load bearing 1.5 inch Fastex buckle. The closure is maintained in use by the tether clip. 
  • Non-adjustable for lightweight and simplicity. One for summer, one for winter, to allow for layers.

Watch in Practical Sailor for an article on jackline locations.

 For me, windward lines and short tethers are the best bet. And my boat doesn't even lean!
 

Quick Release vs. Locking Carabiner at Chest End of Tether

As a single hander, I'm fairly certain that cutting myself free is seldom better.
  • Cold water. Today, for example, I was sailing on the Chesapeake with 34F water temperatures. I did not see a single boat over a 4 hour period. Unless we all take to wearing drysuits, the only ending is slowly freezing in your PFD. 
  • Accidental opening. Ever have a spinnaker shackle release unexpectedly? Granted, it was generally because the shackle was not closed properly, but that is only proof accidents happen. A locking biner is more secure.
  • Offshore. Same as cold water. Yeah, someone could be coming for you. Probably not. 

I don't fancy the idea of dragging, so I keep my tether short when near the rail, and crawl when I need to.

Not a screw-lock on the tether end (Kong Tango). That would be silly. 

rev. 7-24-2024. I now have tethers with snap shackles on the harness end and tethers with a Kong Tango. I feel like the snap shackle makes sense in-shore and if the water is warm or I am wearing a dry suit. Swimming is better than dragging.  But I still feel it is situation specific and that US Sailing is wrong (require snap shackles) and World Sailing is right (leaves the choice to the user). For example, if I were single handing across and ocean , I still don't see how releasing is going to be much better, and I still feel that accidental release is the greater risk.

 

 

As for multihulls, just keep the jacklines well in the from the edge. You've got lots of room. Also, because multihulls can stuff and stop fast, terminated the jacklines 4-5 feet back from the front edge of the tramp.

Exposed Wiring

This exposed solenoid always bothered me. Non-AYBC compliant, non-USCG compliant, and a short looking to happen, the backside of this anchor windlass breaker has high-amperage exposed terminals.


I fabricated this simple cover from 0.09-inch FRP (the same materials I used for the window covers. Cut by score-and -snap, trim with disk sander, fillet corners with Epoxy + colloidal silica, finish with orbital sander and paint. In stead of screws (holes would show), attach with 3M Dual Lock.


 The finished product looks factory. I think I will be using a lot of Dual Lock during the AC installation.



I fabricated a 

Friday, January 8, 2016

Pirates, Convoys, and Herd Behavior

Apparently some local thugs have been stopping boat sailing from Grenada to Trinidad, robbing them at gunpoint. The question was posed as to whether it was safer to run dark and quiet alone, or seek safety in a group. Perhaps nature has the answers, millions of years of evolution sorting strategies that work from those that don't.

Birds and Fish. Assuming the predator can easily catch the prey (true) and that the predator does not migrate to follow the flock or school (true), the advantage of the group is that the predators will only eat a fixed amount. When the group is not present, the predator with switch to a different food source (work, laze about) until the next group comes along. Overall, the amount of predatation is less because the food source is not available to the predator all of the time. In other words, the pirates will still hit the herd, but only 1-2 boats and the rest will pass safely, reducing the pirate's over all opportunity.

Distraction. Interestingly, while some predators will charge into the flock, thrashing about in a target rich environment, most would rather pick off stragglers. It is theorized there are 2 reasons. First, it actually hard to track a single individual in the mele'. Perhaps this would be true in a convoy as well, if boats purposefully changed courses. Second, and more to the point, the straggler is perceived to be easier to catch. Moral: if you are in a group, don't be that straggler, be the guy with the fast boat and buddy-up with someone. And while it might seems loyal to wait for the straggler, World War II convoy strategy dictated that stragglers got left behind; loyalty only meant more time for the group in the danger zone.

Visibility. What is more stealthy, and individual or a herd? Unless the pirates are using good RADAR, a single boat is hard to spot. And for goodness sake, turn your RADAR off. Many rodents are nocturnal, preferring stealth to heard behavior. And they have been around a long time.

Defense. Some animals use a defensive strategy. In the case of bison, the males are impressive, not built for running away, and are a match for whatever they may meet, so long as they stick together. But when guns are involved, cruisers can win this.

The second type of defense involves sacrifice. Insects and even humans have the ability and even urge to taken on foes they cannot hope to best or drive off in defense of kin, even if only to buy time for escape. If you are by nature a protector, this is a danger. You will feel obliged to defend even when you have little to offer and may put yourself in harms way.

---

The best strategy, other than flying commercial air?
  • Do the pirates use RADAR? If not, going outside of the shipping lane and running dark should help.
  • A group may help as well. The pirates may be intimidated. Perhaps someone in the group is armed (they don't know and it is hard to control a group). I would think 4 boats staying tight is the minimum.
I would vote for pretty crappy weather. No moon, poor visibility, rough, hard to board, hard to shoot, hard to use RADAR, and just how seaworthy is their boat? They'll stay home, assuming you will too.

Sunday, January 3, 2016

Time, Money, and Energy

Life--the part that matters--requires a balance of 3 things: time, money, and energy.


 As children have time and energy, though little idea what to do with it. Hopefully we learn to play with others, to sit quietly in woods alone with our thoughts and nature, and the skills required to do something we can be employed for doing.

For the next 45 years we grind what ever grist the mill requires, learning, having some fun along the way, and saving something for the future. We have money and energy, but little time to live.

Eventually we retire. Time expands and many don't know how to fill it with anything that matters. They become hollowed out. Between sailing, climbing, and writing, I don't have the time for that. Seniors (hopefully) have money and time, but are often so worn down by life--perhaps physically, but just as likely emotionally--that they lack the energy to really live. They mark time and try to smile.

I find myself in a hybrid place, with time enough to do anything I feel is important, energy but not that I once had, and plentiful stuff but no income to speak of. A good solid job could bring financial security, but if that compromised this new life--in which the mystery of the future plays no small part--is it worth the price? Just a few years ago I couldn't have asked this question. I would have rushed right past, no time for introspection, too many bills and not enough nest egg. I still don't have enough nest egg to meet professional expectations, but what if I lower those expectations? What are time and energy and life worth? I don't know yet, but I have to find out.

For now I feel like that 12-year old boy I remember being, sitting in the woods,alone with my thoughts, building a tiny Indian village out of sticks and leaves. Or maybe in the workshop building an electric car from bits of scrap. Or sitting on a curb with some friends, deciding what we think is important in the world. That was living, and I didn't really miss the money. A single dollar stretched forever, in part because Mom and Dad supplied whatever I really needed, and in part because fun wasn't made of things.