Showing posts sorted by relevance for query formula b. Sort by date Show all posts
Showing posts sorted by relevance for query formula b. Sort by date Show all posts

Wednesday, November 8, 2017

100 Best--Chapter 12

Mildew

I just got a new boat, and guess what--the carpet on the cabin liner was heavily blotched with black spots. But They did not relate to any pattern of water leakage, just poor ventilation, so I feared not. I knew they could easily be removed and their return prevented. A good thing to know.

In Chapter 8, Boat Prep I mentioned diluted bleach. This is obvious enough, but remember that bleach can't be used near most fabrics. Additionally, it is not the most effective product at preventing return. And it's nasty to work with.

First, my work-horse anti-mildew formulations. It is cheap, more effective in most cases than anything else,  and safe for both you and all materials. Mix up a gallon and dispense it through spray bottles.

No number (this is a repeat). Formula B from Practical Sailor. When asked to review some formulations for the magazine, the chemical engineer in me couldn't resists improving on the available commercial products. The result of reviewing old patents and considering the requirements for cleaning mildewed carpeting was a DIY mixture of borax, washing soda, and TSP (trisodium phosphate--NOT TPS substutute), all available at either the grocery store or the hardware store. This pennies/gallon blend is perfect for cleaning carpet and bilge spaces, and KEEPING mildew from returning. Spray enough to soak, wait 2-10 minutes, scrub for a few seconds, and in the case of fabrics, remove excess with carpet cleaner extractor or shop vacuum. Do Not Rinse, since the residue will prevent the return. Do NOT Increase the concentration; it will not clean better and you will have to rinse. Also very effective for use in a carpet cleaning machine for both wet basements and pet mess (the best thing I have found for cat pee).

No number (this is a repeat). Oxiclean and all sail cleaners containing percarbonate as an oxygen bleach. These are not aggressive, fast stain or mildew removers. They take 4- to 8-hour soak times and seem to need sunshine to help them finish their work (the percarbonate weakens certain chemical bonds and UV finished the job). But they are safe on most fabrics (not wool or silk), nearly always color safe, and are just the thing to remove what Formula B left behind when cleaning white fabrics (not generally needed for anything other than whites).

And now for some new listings:

Discontinued?

71. Clorox Pool and Spa Green Algae Eliminator (discontinued?) This is the cheapest way to buy the ingredient we are looking for, benzalonium chloride. A bargain for a 50% solution, this was suggested to me by a Seattle sailor (See Windborne on the sidebar) who was cursed by lichens growing on his deck. This kills them. However, it is also a very effective preventative for both mildew and algae on a variety of surfaces, so long as they are not exposed to frequent rain. Dilute 2 ounces/gallon, spray, and let dry. Also very effective for cleaning lichens from sail covers and canvas. In this case, spray, wait 1-2 weeks, and then scrub; it takes time for the BAC to kill the lichens and moss, and then for the sun to break their grip.

Also good for taking moss off the roof at home. Spray in dry weather, and then just leave the sun and rain to remove the dead bodies.

71a. Wet and Forget. Although 5x more dilute (only 9.9% BAC) , the formula is just as effective, you just don't dilute it as much. Instead of diluting 50:1 to make a 1% solution, dilute 10:1.  The result is a bit more expensive, but not excessive if you clean the surface first.

 

72. Eva-dry-2000 dehumidifier. Discussed in this post, I've been using this dehumidifier for 9 years, and though it lacks the capacity for a home, it is enough for a boat and does not draw so much power as to present a hazard if run unattended (though I do place it on the stove top--seems like the safest place). As described in the post, I added a drain, which is led to the sink. Low humidity in the cabin means no musty mattress or pillow.


73. Keep Things Clean. While hardly a product recommendation, the bottom line is that good sanitation begins with cleanliness, and mildew require food. Wipe all hard surfaces down at least 2x per year. Bilges too. It's not that bad, and when something needs fixed, you'll be thankful.

74. Keep the Bilge Dry. Without a dry bilge, the boat cannot be dry. Likewise all cabin leaks. The most common cause of hatch leaks is dirt on the gasket; wipe them all clean several times each season, and treat with a wax to make them water repellent if the problem persists.

75. Keep a Fan on the Boat. Sometimes things get wet, and it's great to get them dry.

75a. Take Wet Things Home. Yup, lugging is a pain. But they won't dry in the boat and this will teach you not to get them wet. If you have a dodger, leave wet rain gear and towels on deck rather than below. I often do this even if I won't be back for weeks. I've never had anything stolen from the boat. Beaches and dinghies, yes.

Monday, August 14, 2017

Best 100--Chapter 8

It's been a while. I assume you all understand that while my boat was for sale, the greatest value of this blog was as a marketing tool. However, Shoal Survivor is now under contract and we can get on with business as usual.

Yes, I am momentarily boatless. However, that does not mean this blog will change.
  • PDQ content will become somewhat less. But that does not mean I am reluctant to answer questions or work on PDQ problems. After all, most boat problems are, to a significant extent, universal. I also know the PDQ inside out and enjoy sharing what I know.
  • This blog will not come down or become inactive.
    • PDQ materials, such as the PDQ 32 owners manual, will remain available.
    • My writing, both magazine and e-book will continue unabated. It is my life, and this blog supports both, developing ideas and sharing comments.
  • I am actively searching for a replacement boat. Something different. Writing and research demand a broad experience, and I intend that a new boat will add a new dimension. It will be something much different.
So on with my list of "100 Best." I've got most of the list in my notes, as a backlog of things I've already tested or used anyway.

______

In celebration of the successful sale of Shoal Survivor to  her new owners, this is a listing of some of the most useful boat prep products. I have been an active sailor and I have never been a clean freak. Good solid maintenance, and fix things stronger than new, but not a clean freak. Shoal Survivor has been well lived in, and we cleaned them up.





41. Oxiclean. over half of the lookers ask whether I had sewn my own cushions or whether I had had them made. They were so clean and in such good shape that none believed they were 20 years old. In fact, I actually used a wholesale-only product for most of the cleaning called CS-530 and marketed for cleaning sails by Challenge Sail Cloth. This is what many of the lofts use for professional sail cleaning. But at the end of the day, it is Oxiclean with a touch of Spic-N-Span added. Hot water, soak for 4 hours, rinse. Leave in the sun, because the sun helps it keep working. If you cannot remove the cover, scrub in place and then extract the water with a carpet cleaner.

 Percarbonate is the key. Unlike bleach, it does not fade colors or weaken the cloth. This later is why Challenge Sail Cloth can recommend it. Long soak times (2-4 hours) are required and some time in the sun helps finish the job. A carpet vacuum extractor is very helpful for overs that cannot be removed.

42. 303 Aerospace Protectant. No, they don't really protect much. Yes, there are many good vinyl and fiberglass cleaners and protectants..

43. Imar and Plexus for windows and vinyl. Both are highly regarded by sailmakers and plastics manufacturers. Both have been put through rigorous testing. Imar polish lasts longer and protects better, but Plexus is more convenient for cleaning and polishing. I use both.

 The best protection is to keep vinyl covered, protected from UV. Can you guess where the cover stopped? I have covers for all of my soft vinyl.


44. Xylene. Always be cautious around plastics with solvents. The compatibility rules are complex and it is always possible to mis-identify a material. That said, xylene is the go-to product for removing most organic goo from fiberglass:
  • Black heel marks.
  • Tape residue.
  • Fender goo rubbed that transfers onto the topsides.

45. 3M rubbing Compound. Although I did not compound the whole boat, she had accumulated plenty of black heel marks from winch handles and bad shoes. Remove what you can with solvent, and then a very light buffing gets the rest. Also good for buffing old acrylic or Lexan windows prior to waxing. (NEVER buff soft vinyl until you study the Practical Sailor guide to restoring vinyl. Without proper procedure and materials, this is  good way to ruin soft vinyl.)  Get a cheap 6-inch buffer from Harbor Freight and save it just for the windows. It is worth it just for that.

46. Boat Zope, Sudbury Products. Both more effective and much more economical in use, since very little is used. In general, it was sufficient to power off both old bird bombs and lichens without further assistance. Allowing a few minutes soaking period helps with any soap.

47. CLR diluted to 5%. You can buy black streak removers and tannin removers (for the ICW smile), but a spray bottle of 5% CLR does the trick for a small fraction of the price. Just lactic acid and a little surfactant. Available at Home Depot.

48. Diluted Bleach. Same thing. Just pre-dilute to about 5% of bottle concentration and save a bundle. Great for mildew and loosening lichens. But do be mindful of fabrics. NEVER use this in sails or canvas. Read # 41, Oxiclean.

49. Easy Off. Our wives know this, but most (non-kitchen savy) men haven't got a clue. An old grimy galley stove or stern rail grill can be relieved of 10 years worth of baked on grease in a few minutes. Be warned that this will burn the skin and that it can remove some paints (latex and bottom paint).

50. Formula B (Practical Sailor). A DIY mixture of Borax, washing soda, and TSP, this pennies/gallon blend is perfect for cleaning bilge spaces and KEEPING mildew from returning. The best available for removing mildew from carpet liners and flooded basements (what drove me to invent and perfect the formulation). Concrobium is also good, if you like paying 20 times more. GoldShield products are more durable if rain is a factor.

_________

Halfway home and I'm not even breaking a sweat.

Saturday, April 20, 2024

Borax: Formula B, Stopping Mildew Cheaply and Effectivly, and How the EPA Can Make Everything Complicated

rev. 4-20-2014, rev. 4-9-2024

This 10-year old blog post describes some work I did on mildew prevention 10 years ago. I took it down because I published a few articles on the topic, but here it is again. I'll post a follow-up in a few weeks with some other stuff I've learned.


Websters' version

Borax: 1. a white crystalline compound that consists of a hydrated sodium borate Na2B4O7·10H2O, that occurs as a mineral or is prepared from other minerals, and that is used especially as a flux, cleansing agent, and water softener, as a preservative, and as a fireproofing agent.


EPA's Version

Borax: pesticide products containing boric acid and its sodium salts (borax) are registered in the U.S. for use as insecticides, fungicides and herbicides. As insecticides, some act as stomach poisons in ants, cockroaches, silverfish and termites, while others abrade the exoskeletons of insects. As herbicides, some cause desiccation or interrupt photosynthesis in plants, while others suppress algae in swimming pools and sewage systems. As fungicides, several are wood preservatives which control decay-producing fungi in lumber and timber products.

http://www.epa.gov/oppsrrd1/REDs/factsheets/0024fact.pdf

While generally considered safe--still used in many big-name laundry detergents--if I claim a cleaning formulation containing borax keeps mildew away, I have to register it with the EPA before marketing. But I can sell you a box of borax without registration. Go figure. Is it really about safety? I don't think so. Borax is only about twice as toxic as washing soda (LD50 borax and boric acid are about 2500 mg/kg BM. Although borax is suspected in certain reproductive problems in laboratory animal testing, it is not associated with cancer and does not bio-accumulate.).

It seems that anything that works must be poison, or at least regulated. That is governments purpose.
______________________

As part of a future Practical Sailor article I began exploring fumigating agents and anti-mildew products. I truth, most projects I take on are because I've had some troubles related to the subject in question and thus have some understanding and some additional motivation. Every boat has at least one damp spot prone to mildew, and in my case, I have a basement prone to wet carpets every few years. Not flooding, but mildew potential.

I began exploring the formulations of some successful products. Concrobium is one, dreadfully over priced at the local hardware, particularly considering you can look up the underlying patents (EP 1104450 B1) and learn that each quart bottle ($18.00) contains nothing but:
  • 1 tbs baking soda (sodium bicarbonate)
  • 2 tbs washing soda (sodium carbonate)
  • 2 tbs TSP (trisodium phosphate)
Simple and effective. The chemistry makes perfect sense; it is applied without rinsing and thus leaves behind a thin alkiline coating that repells bacterial and fungal growth (fungi require acid conditions) and provides no food for growth (soaps contain fatty acids and make great fungi food). More is not better because it is used without rinsing, the limitied concentration is important.

That got me thinking, so I began trying other variations including my favorite, also in 1 quart:
  • 2 tbs baking soda
  • 2 tbs borax
  • 1 tbs TSP
I've been testing all three on some mildewed carpet sections, cleaning by scrubbing lightly and then extracting with a vacuum. Which is best? After 6 months they are both perfect, although the borax version killed the smell a bit faster.

______________________

Other Applications

Basement Carpets and Walls. We've had problems with a wet basement and biannual flooding for 20 years. I've washed and dried a lot of carpets. Learning to use this formulation as the rinse was a revelation. No more mildew smell, no more mad rush to get them dry. No more black stains. Simply use this as the rinse water and the carpets stay fresh.


Preventing Wood Rot
Borax is VERY effective in preventing wood rot. I've used it myself mixed with ethylene glycol (Goolge it) to preserve a common pine totem pole in damp soil and remain impressed; it's staying as though it were pressure treated, 6 years and counting. West Systems Epoxy has posted on this subject. The National Park Service posted this on preserving totem poles in the PNW with borate/glycol.

Bugs
Obviously, they can't stand boric acid. One of the most common extermination products, particularly around kitchens and bedrooms (works on mattresses). It's not going to work on the flying pests, though, the only ones I have trouble with. Darn.

Wooden Decks
Seems like a good cleaning choice. Should help keep the algae away. Limit the TSP if you wish to be bay-friendly. Try it on your home deck for a little boost to the pressure treatment.
Combine it with some bleach as needed.
Sails
A less alkaline variation is well known and should keep the mildew away. Reduce the dose:
  • 1 tsp baking soda
  • 1 tsp borax
 ________________________
Oh, the power of good marketing. I swear I'm not just trying to be trying to be cheap. Furthermore, I'm a chemical engineer and have no phobia regarding synthetic chemicals. I'm not pushing this because of some hidden green agenda or because it is less toxic. The strength of these formulations is basic:
  • No organic mildew food
  • Mildly alkaline film
  • Borate as mildewstat
I'm also reviewing some nice complex organic formulations that promise better water resistance. We'll see.

Monday, October 16, 2017

How Long is Your To-Do-List?

10-16-2017, rev. 9-30-2024
 
Just a sampling of the tasks accomplished over the past few weeks. There was more in the weeks before. A terrible traveler design required mounting additional blocks to fix. A barber hauler was fabricated. The hinge for lowering the mast had been destroyed by a PO error and a new, stronger one fabricated.

I like zero-slack in a windward travel car. Fewer tangles.

9-22-2017

  •  Replaced Dyneema portion of both shroud tensioners.  The factory version was 5/32-inch Dyneema, certain to fail after about 10 years in the sun. I upgraded to 1/4-inch, which should remain about required WLL for 20 years. Four bury splices required.
  • Whipped cover over tail of Spectra/Spectra furler line to improve grip both in hands and jammer.
  • Swapped the junk pivoting fluke anchor for a 12-pound Northhill. I took a spare rode and spliced that to the chain I had, since the chain, shackle, and rode on the junk anchor were... junk. The nice thing about the Northill is that it is about the only non-pivoting fluke anchor that will fit in the locker, because it also folds down; they were originally designed for seaplanes.
  • Replaced ordinary deck screws used to secure aka load pad by PO with stainless. A missing pad can result in considerable damage with these boats.
 
Barberhauler. On multis it goes WAY out when reaching deep.


 
 9-24-2017
  • Climbed mast and reconned instruments. 
  • Installed new wind indicator(Windex).
  • Replaced broken lever on port jammer (partner did that).
  • Tried loosening screws on broken bow sprit pivot. Due to lack of Tefgel, this was a failure (ended up just grinding them flush).
  • Rerouted furler line to eliminate chafe. Added new fairlead. 
  • Went sailing.
 9-27-2017

  • The battery is no good.  It was 11.7V  when I got there, and after 5 hours at ~ 8A it was 11.9V. This is a classic indicator of one bad cell.
  • Checked motor charging. The voltage increased 0.2-0.3V when it was running, depending on RPMs. This is also typical of a battery with a bad cell. The motor charges about 4A at WOT.
  • One of the fire extinguishers was bad. The other is fine and we only need one.
  • Serviced all four winches. The two-speeds were a little gummed-up, but the jib winches were nearly dry and have suffered some wear from this abuse. I suspect they have not been serviced in >10-years, perhaps never. They now have Lewmar grease, new springs, and two have new palls. 
  • Replaced the rubber washers on the beam clamps. They a were completely shot, and damage to the fiberglass was beginning.
  • Bowsprit repair finished.I really like the way it came out. If you adjust the bobstay tension in synchronization with the up-haul line, the butt of the pole is very nicely nestled in the polyethylene saddle. Better than factory. I was not able to get the screws out, so I ground them flush and tapped 3 new 1/4 x 20 bolts in the neutral axis. Very strong.
  • Installed 3/32" FRP liner in the bottom of the anchor locker to protect against bangs.
  • Fabricated anchoring bridle, complete with all hardware, in the anchor locker (blue climbing rope).
  • Replace the missing twist locks in the cockpit.Took the bags at home and will give them a quick re-vamp (a few stitiches and some elastic).
  • Installed two 1/4" threaded studs in the starboard cockpit locker. I will make up a row of hooks tomorrow ind install that in a few days. That will take care of the PFDs, fenders, and rope coils.
  • Fixed traveler... I believe. I converted it to 3:1, played with the slack, and spliced the ends. It seems jam-proof now. The original system was unusable.
  • I put a smaller pin on lanyard on the  beam locks. The big pin is better for trailing, but it's a battle until we fix the alignment. I wonder if we need to look at the adjustment of the x-cables under the tramp. This may be part of the problem.
  • I will be fabricating a topper for the storage bin forward of the sink. Also a drop-in bag. 
  • Fixed the paper towel holder.

9-28-2017

The bar mounting the hooks is mounted to two studs (black knobs) and is removable.

  • Repaired one cockpit bag. The other was badly fitted by the PO and is going home for alterations.
  • Storage hooks installed in the starboard cockpit locker. (the locker had no floor and is how you crawl under the cockpit). All of the PFDs, ropes, and fenders are now hanging in easy order, and there is some remaining room. The whole works can be removed by unscrewing two knobs. I'm gotta write this up a DIY idea. 
  • Installed counter topper. I took it home for more varnish. It's going to make a good "catch-all" spot.
  • Primed and tested the water pump. Fixed some minor leaks, so it is good to go.
  • Cleaned some, removed some rust stains. C
  • Cleaned/lubed the stove. Works better now.
  • Added a backing plate for the anchor well padeye. There was none, and if the boat had come back hard on the line, the eye would have pulled out.
  • I added a whipping twine marking to the centerboard lines. The whipping is be 1-2" below the cleat when in correct position.
  • I added low friction rings to the ama end of the barber hauler lines. This makes it easier to adjust the under load. In a breeze, using the sheet winch can help. Sewn eyes.
  • I refurbished the masthead inst. a bit. Cleaned and lubed bearings, replace vane and wheel.


Counter topper, not dissimilar from the one on my PDQ. In this case I secured it with a pin, since the top was a useful cutting board I did not wish to eliminate.


October 5-10

  •  Cleaned the entire hull lining with Formula B and a upholstery extractor. The stains came out.
  • Solar charging. 50 watts and a charge controller.
  • A fan and USB charger.
  • Boom outhaul revised.
  • Sail repair. Three spare sails repaired.
  • New o-rings in crash tank hatches.
  • Mini-dodger designed (watch Good Old Boat for this one).
  • Mini-tramps to block the holes where your leg can go through.
  • Repaired Autohelm power plug. 



Mini-Dodger partial mock-up. Enough to keep the rain out, with minimal weight, windage and view obstruction, and stores flat under a mattress. It's going to be so slick!
 




Finished. It does not protect the cockpit, but it does allow the companionway to stay open in wet weather. One down side is that going down the companionway is awkward (not high enough--you have to sit on the ledge first. It does give standing head room inside. 
 
You can't put the drop boards in while it is installed, and I can't think of a good way to make doors that would not be in the way. Sometimes you need one drop board because of the open transom, though I installed a removable washboard aft of the traveler that mostly negates that need, though I would like it in hard rain. But you could never get below with a drop board in because you have to sit on the ledge.  You can't close the slider, so you can't leave it installed when you leave the boat. Storing it under the bunk makes it hard to get to the head, which has not actually been a problem, since the head is used less than once each year. 
 
I'm considering a larger version that could stay in place, but it can't block the winches or drop boards and I can't think of a good drop board replacement.  I'm still puzzled.
 
I guess it is an imperfect compromise.


 And there will be more...
  • Cleaning.
  • Crack in the hull liner.
  • rebedding deck fittings. 
  • Storage in amas.
  • Play in tiller (shims in kick-up mechanism.
  •  
... as well as a few that will feature in articles.

 And yet compared to the PDQ, the projects are individually smaller, cheaper, and less daunting.